|
Row units on right-hand side of machine not planting.
|
Right-hand drill-shaft drive coupler cotter pin sheared.
|
Repair cause of pin shearing and replace cotter pin.
|
|
Row units on left-hand wing frame not planting.
|
Left-hand drill-shaft drive coupler cotter pin sheared.
|
Repair cause of pin shearing and replace cotter pin.
|
|
Closing wheels leave severe imprint in soil.
|
Too much closing wheel down force.
|
Decrease closing-wheel down force.
|
|
Closing wheels not firming soil around seed.
|
Insufficient closing wheel down force.
|
Increase closing wheel down force.
|
|
Closing wheel running on top of seed furrow.
|
Improper centering.
|
Align.
|
|
Consistent shearing of drill-shaft cotter pin.
|
Drill shaft not aligned properly.
|
Loosen bearing and align shaft.
|
|
Seed tubes plugging.
|
Planter rolling backward when lowering.
|
Lower planter while moving forward.
|
|
Inconsistent seed depth.
|
Planting in rough seed bed.
|
Use additional down force on planting units.
|
|
|
Seed tube partially plugged or improperly installed.
|
Inspect seed tubes. Ensure that seed tubes are hooked properly in unit shank.
|
|
All row units not planting on planter.
|
Cotter pin in contact drive tire sprocket to seed transmission sheared.
|
Repair cause of pin shearing and replace cotter pin.
|