Installing Service Locks

CAUTION: Always install service locks (A) when working around or near planter.

NOTE: Service locks are provided for added safety when performing normal maintenance and adjustments with machine raised. They are not transport stops. Machine hydraulic system requires that wheels float up and down in transport to properly distribute frame weight to individual wheel modules.

Raise machine to transport position. Pivot service lock (A) into position on wheel module cylinder rods and fasten with drilled pin (B) and spring-locking pin.

A-Service Lock
B-Drilled Pin

AG,OUO6074,1702 -19-07AUG00-1/1