Replacing 6 and 8-Row Narrow Marker Breakaway Bolt

Marker breakaway bolt (A) provides breakaway protection when marker hits an obstacle.

A-Breakaway Bolt

AG,OUO6074,1707 -19-23JUN09-1/4

NOTE: Extra breakaway bolts are visible behind marker plate after marker has broken away (6-row narrow are grade 8.8 bolts and 8-row narrow are grade 10.9 bolts.

1. Replace broken breakaway bolt with M10 x 100 grade 8.8 bolt (A). Position new bolt in pivot with slot in block facing up as shown.

A-Bolt

AG,OUO6074,1707 -19-23JUN09-2/4

NOTE: Verify flat sides (B) of A45294 bolt are in the slot in pivot.

2. Remove wrench (C) from storage position and remove nut securing large bolt (A) from frame. Install large bolt on breakaway bolt.

3. Attach large bolt with M10 nuts.

4. Return marker arm to operating position and insert breakaway bolt through hole in planter frame.

5. Attach breakaway bolt with M24 nut.

A-Large Bolt
B-Flat Sides
C-Wrench

AG,OUO6074,1707 -19-23JUN09-3/4

7. Attach wrench in storage position with spring-locking pin.

AG,OUO6074,1707 -19-23JUN09-4/4