Replacing 8-Row Wide and 12-Row Narrow Marker Breakaway Bolt

Marker breakaway bolt (A) provides breakaway protection when marker hits an obstacle.

NOTE: Extra (8.8 strength) breakaway bolts are located on lower side of marker frame at (B).

To replace breakaway bolt, proceed as follows:


A-Breakaway Bolt
B-Extra Breakaway Bolts

A37589

AG,OUO6074,1708 -19-23JUN09-1/2

Return marker arm to operating position and insert M10 x 80 mm breakaway bolt (A) through plate (B), slot in marker frame (C), and hole in machine frame (D).

Install one M10 nut (E) and second M10 nut and tighten to specification.

Specification

M10 Nut -Torque 55 N·m (40 lb.-ft.)


A-Breakaway Bolt
B-Plate
C-Marker Frame
D-Machine Frame
E-Nut, M10

A37588

AG,OUO6074,1708 -19-23JUN09-2/2