Adjusting Seed/Fertilizer Transmission Wheel Engagement Point

The seed and/or fertilizer transmission engages when machine is lowered into planting position (transmission wheel contacts drive wheel) and disengages when machine is raised into transport position.

NOTE: To disconnect drive sooner - increase dimension (C). To disconnect later - shorten dimension (C).

To establish engagement point of transmission wheel (B) with drive wheel, in the lowering cycle of machine, adjust cap screw (A). As a starting point, adjust dimension (C) to 87 mm (3-7/16 in.).

A-Cap Screw
B-Transmission Wheel
C-Adjustment Dimension

OUO1074,00001B1 -19-22MAR04-1/1