| Tractor Settings |
| Item to set |
1760 Planter Models |
| Drawbar Distance From Ground |
480 mm
(19 in.) |
| Drawbar Position |
Centered in Short Position |
| Drawbar Category |
All planters require a category 4 drawbar |
| Planter with Drawbar Hitch Ring |
Hammer Strap must be installed on tractor drawbar |
| Planter with Drawbar Hitch Clevis |
Hammer Strap MUST BE REMOVED from tractor drawbar |
| Quick Tach Coupler |
Removed or Rockshaft Operating lever locked in up position |
| Tire Ballast |
Limit liquid or cast weight on rear tiresa, b |
| Tractor Hydraulics Requirements |
Closed Center Only
Minimum tractor hydraulic pressure - 15 513 kPa (155 bar) (2250 psi)
Working pressure - 20 684 kPa (207 bar) (3000 psi) |
| Tire Pressures |
See Tractor Operator's Manual. |
| Hydraulic Controls |
See HYDRAULIC CONNECTIONS RECOMMENDATIONS in Attach Machine section. |
| aDual rear tractor tires are recommended for stability and for load carrying capacity, especially when the machine is folded for transport. |
| bTo carry the machine for transport, limit liquid or cast wheel weights on rear tractor tires as tire load carrying capacity is decreased. |