Touchscreen Calibration

1. 
   A59325-UN-19FEB07

   Menu

   
   A59565-UN-08MAR07

   Display Button

   
   A59567-UN-08MAR07

   Diagnostic Softkey

   Select Menu >> Display button >> Diagnostic softkey.

---




2. Select Tests tab.

3. Select Color Test button. Three distinct colors appear for 5 seconds (Red, Blue, and Green). If three colors do not appear, contact your John Deere™ dealer.

4. Select Touchscreen Test and touch the screen in area of suspected malfunction. A target image appears under tip of finger. If target image does not appear when screen is touched, contact a John Deere™ dealer.

5. Select Touchscreen Calibration button.

6. Touch the screen over each X symbol as it appears on screen. Several X symbols appear in sequence, then a screen appears to indicate calibration was successful or unsuccessful.

Select primary menu button to end the touch screen test and navigate back to desired screen or application.

Screen Area Information

Display - Display
Display Diagnostics - Display Diagnostics
Tests - Tests
Color Test - Color Test
Touchscreen Test - Touchscreen Test
Touchscreen Calibration - Touchscreen Calibration
Calibration Successful - Calibration Successful
Calibration Unsuccessful - Calibration Unsuccessful
Reset Touchscreen Calibration - Reset Touchscreen Calibration