Checking Fluted Grain Feeds

CAUTION: Be careful when using diesel fuel so that it does not ignite causing serious injury or death to you or others. Use only in well ventilated areas away from any sparks or flames.

  1. A39892
    A39892-UN-19JUN96

    A - Drive Wheel

    Raise machine so drive wheel (A) is not touching the ground.


  2. IMPORTANT: Do not allow diesel fuel (or any other petroleum product) to contact rubber tubes as it causes deterioration.

    Rotate drive wheel in normal seeding direction. If shaft turns hard, loosen moving parts with diesel fuel. Check rolling torque of feed shaft. See CHECKING FEED SHAFT ROLLING TORQUE in Service section.

  3. Turn drive wheels daily, before adding seed. If treated seed is used, turn drive wheel whenever machine has been standing for an hour or longer.

OUO6074,00004D8-19-20020204