Transport Safely

A34331-UN-13OCT88

A53085-UN-23OCT03
Avoid serious injury or death resulting from loss of control
or rear end collision during transport of implement and any towed
load behind implement.
Always raise parking stand before transporting.
Tractor brakes must be latched together.
Attach a properly sized safety chain between machine and any
towed load.
Shift tractor into a lower gear when transporting down steep
slopes or hills.
Always travel at a reasonable and safe speed. Never exceed 32
km/h (20 mph).
Never transport machine when more than half full.
Never exceed 13 600 kg (30 000 lb.) of towed weight behind machine
while in field.
Always use flashing warning lights, day, and night when transporting
on a public roadway.
Keep reflective material and SMV emblem clean and visible on
implement and any towed load.
Prevent collisions between motorists and slow moving equipment
on public roads. Frequently check for traffic from the rear, especially
in turns and use the turn signals.
Everyone must be clear of machine.
For stability and operator safety, tractor must be properly
ballasted.
If tractor has ROLL-GARD Safety Canopy, keep seatbelt fastened when transporting.
Know transport height and width of machine.

A34333-UN-13OCT88
Install marker lockup straps (if equipped), to prevent injury
from lowered marker.
Keep marker arms away from overhead power lines. Serious injury
or death can result. Proceed cautiously under overhead power lines
and around utility poles. Know the transport height of machine.
This implement does not meet all local or national requirements
for transport on a public roadway. In regions or countries that have
national certification requirements for roadway transport, it can
be impossible for implement to be approved for such roadway transport.
The customer is responsible for understanding and complying with all
local, regional, and national requirements regarding roadway transport.
|
ROLL-GARD is a trademark of Deere & Company
|
WP29706,000036D-19-20120509
|
|