Adjusting Pump to Pump Number Setting

1. 
   A35432-UN-21DEC92

   A - Special Tool

   B - Pin

   C - Scale Ring

   D - Nut

   E - Pointer

   Install special tool (A) onto pump pin (B) with teeth of tool aligned with teeth of scale ring (C).

---




2. Loosen nut (D) and rotate scale ring with special tool until pointer (E) is pointing to the gauge (F) number selected from rate chart. Tighten nut (D) to specification.

   Item	Measurement	Specification
   Nut	Torque	25 N˙m (18 lb-ft)

3. 
   A35433-UN-21DEC92

   A - Special Tool

   B - Pin

   C - Spring Locking Pin

   Store special tool (A) on pin (B) located on pump mounting bracket. Attach tool with spring locking pin (C).

---