Liquid Fertilizer Sensors

1. NOTE: This option is only visible if machine is configured for one or more sensors.

   
   A59325-UN-19FEB07

   Menu

   
   A59551-UN-08MAR07

   Planter Button

   
   A59172-UN-29JAN07

   Configuration Softkey

   
   A59369-UN-20FEB07

   Zero Sensor Button

   Select Menu >> Planter button >> Configuration softkey >> Sensor tab.

---




2. Select Fertilizer from drop down box.

3. Select number of fertilizer sensors on machine from Sensors: drop down box.

4. Select each sensor, one at a time, from the Sensor drop down box. Select High Pressure input box and enter a high pressure warning limit, if desired.

5. NOTE: Current pressure is displayed on bottom left of screen.

   Select each sensor, one at a time, from the Sensor drop down box. Relieve pressure in fertilizer system and select the Zero Sensor button.

Screen Area Information

Planter Configuration - Planter Configuration
Fertilizer - Fertilizer
Sensors: - Sensors:
Sensor - Sensor
High Pressure - High Pressure
Cal Value - Calibration Value
Pressure - Pressure
Relieve Pressure - Relieve Pressure
Select - Select