Ground Speed Source

1. 
   A59325-UN-19FEB07

   Menu

   
   A59551-UN-08MAR07

   Planter Button

   
   A59172-UN-29JAN07

   Configuration Softkey

   
   A62104-UN-22FEB08

   Radar Speed

   
   A62103-UN-03MAR08

   Wheel Speed

   
   A62106-UN-22FEB08

   Manual Speed

   Select Menu >> Planter button >> Configuration softkey >> Sensor tab.

---




2. Select Tractor Speed from drop down box.

3. Auto box checked is the recommended option. Radar speed and tractor wheel speed are shown on bottom of screen. The active source used at this moment is displayed in the middle of the screen.

4. To force the monitor to use only one speed source, clear Auto check box.

5. IMPORTANT: Entering a manual speed is an option. A single speed value must be entered. The monitor assumes the planter is always travelling this speed. Travel at this speed for most accurate monitor readings. All rates and warnings are based on the speed entered, not the actual ground speed.

   Select a single speed source; Radar, Wheel Speed, or Manual.

Screen Area Information

Planter Configuration - Planter Configuration
Sensors: - Sensors:
Sensor - Sensor
Tractor Speed - Tractor Speed
Auto - Auto
Select Source - Select Source
Active Source - Active Source
mph - Miles Per Hour
kph - Kilometers Per Hour