Ground Driven Machines—Target Population and High-Low Warnings

1. IMPORTANT: Population and High-Low warnings are entered differently for variable rate drive machines. See VRD MACHINES—CONFIGURE METER, CROP, DISK, AND RATES in this section.

   
   A59325-UN-19FEB07

   Menu

   
   A59551-UN-08MAR07

   Planter Button

   
   A59173-UN-29JAN07

   Rates Softkey

   Select Menu >> Planter button >> Rates softkey.

---




2. Select Crop Name drop down box and choose corn, soybeans, or one of the custom crop names.

3. Select Edit Crop Name button to change crop name.

4. Select Target Rate input box and enter value.

5. High and low warning limits are automatically set to a percentage above and below the target rate. To change limits, select High and Low Warning input boxes and enter new value.

   NOTE: Rates and warning setpoints are saved for each crop name.

6. Select Population Adjust input box and enter value.

7. NOTE: Number of rows planting check boxes are only visible if monitor is configured for a split row and twin row machines. (See CONFIGURE FRAME LAYOUT, ROW LAYOUT, AND DRIVE DISCONNECT WARNING in SETUP Initial System Configuration section.)

   NOTE: To ensure all settings update; actively select the rows planting check box even if a check mark is already in the box.

   Select Rows Planting check box for appropriate rows planting configuration.

Screen Area Information

Planter Rates - Planter Rates
Crop Name - Crop Name
Corn - Corn
Soybeans - Soybeans
Custom - Custom
Edit Crop Name - Edit Crop Name
Target Rate - Target Rate
High Warning - High Warning
Low Warning - Low Warning
Population Adjust - Population Adjust
Rows Planting - Rows Planting
Avg. Spacing - Average Spacing
Seeds - Seeds
ac - Acre