Configure Planter Drive Source

A59325
A59325-UN-19FEB07

Menu

A59551
A59551-UN-08MAR07

Planter Button

A59172
A59172-UN-29JAN07

Configure Softkey

A59377
A59377-UN-23FEB07

Settings Button

H85801
H85801-UN-14JUN06

Enter

H85814
H85814-UN-14JUN06

Cancel

Drive source is configured at the factory for each planter. The only reason to change this configuration is if a different drive system has been installed on machine.

  1. Select Menu >> Planter button >> Configure softkey >> Drives tab >> Drive Configure drop-down box >> Settings button.

  2. IMPORTANT: A Drive Source change resets all planter settings to default values.

    Select Drive Source drop down menu and choose type of drive source on machine.

  3. NOTE: Selecting Cancel returns you to the Drives tab.

    Select Enter button to acknowledge controller reset warning.

  4. NOTE: Wait 30 seconds between power cycles.

    Cycle power.

Screen Area Information

Planter Configuration - Planter Configuration
Drives - Drives
Drive Config - Drive Configuration
Drive Source: - Drive Source:
Ground Driven - Ground Driven
Variable Rate - Variable Rate

OUO6064,00005B8-19-20111110