Configure Drive Sections

NOTE:

A59325
A59325-UN-19FEB07

Menu

A59551
A59551-UN-08MAR07

Planter Button

A59172
A59172-UN-29JAN07

Configure Softkey

A59377
A59377-UN-23FEB07

Settings Button

H85801
H85801-UN-14JUN06

Enter

Verify that Drive Source is configured to Ground Drive. (See CONFIGURE DRIVE SOURCE in Initial System Configuration.)

Configure drive sections.

  1. Select Menu >> Planter button >> Configure softkey >> Drives tab >> Drive Sections drop-down box >> Settings button.

  2. Select number of sections (number of clutches) from drop-down box.

  3. Select next page icon.

  4. Verify that the Start and End Rows match the Left and Right clutch configuration on machine.

  5. To enable Row Command, check the Row Command box.

Planter Configuration - Planter Configuration
Drives - Drives
Drive Sections - Drive Sections
Motor - Motor
Start Row - Start Row
End Row - End Row
Left - Left
Right - Right
Number of Sections - Number of Sections
Row Command: No - Row Command: No
Row Command: Yes - Row Command: Yes

OUO6074,0000ACD-19-20110429