Removing From Storage

CAUTION: Keep all shields in place. Do not operate machine if any safety shields are missing. Entanglement with rotating parts can cause serious injury or death to you or someone else.

1. Check inside of tanks and remove any obstructions.

2. Lubricate meter drive chains with John Deere Multipurpose Spray Lube TY6350 and install. If roller chains have become rusty or stiff during storage, “work” chains while lubricating to ensure that all joints move freely.

3. Check tires and inflate as necessary.

4. Clean the machine thoroughly.

5. Perform required lubrication. (See Lubrication and Maintenance section.)

6. Check all hardware and torque bolts as needed.

7. Review operator's manual, giving special attention to safety precautions.