Remove Air Hose Blockage

1. Determine if blockage is in primary or secondary hose.

2. Raise tool completely and close lockup valve.

3. Primary Hose: Remove primary hose from affected tower.

4. Shake hose starting at air cart until blockage spills from end of hose.

5. Reconnect hose.

6. Continue seeding and observe affected row for product flow.

7. If no seed flow is observed, repeat procedure.

8. Secondary Hose: Remove secondary hose from affected row.

9. Shake hose starting at air cart until blockage spills from end of hose.

10. If blockage is not in secondary hose, remove lid from tower and clear header ring.

11. Reconnect hose and install lid.

12. Continue seeding and observe affected row for product flow.

13. If no seed flow is observed, repeat procedure.