Changing Oil in Final Drives (Front-Wheel Drive Axle with Brake)

Replace oil in the final drives after the first 100 hours of operation. Then replace after every 750 hours of operation. Always use a transmission oil listed in the "Fuel, Lubricants, Hydraulic Oil and Coolant" section.

causym CAUTION: If final drives are hot, oil is under pressure. Remove drain screw slowly.

1. Turn wheel until drain screw (A) is at the bottom. Remove drain screw and drain oil into a suitable container.

2. Turn the wheel through 90° so that the "Ölstand" mark is at the bottom (see "Service - Every 250 Hours"), and add oil at the hole for the screw plug. Oil should be level with plug bore.

3. Re-install drain screw and tighten to 150 N·m (110 lb-ft).

For capacitiy, see "Specifications".

LX1031559

OU12401,0010419 -19-01MAR03-1/1