Manual Park Lock Release (Tractors with AutoPowr)

causym CAUTION: Perform the manual park lock release procedure only when the tractor needs to be towed and the park lock cannot be released normally.

causym CAUTION: The reverse drive lever must be in the corner Park position "P" in order to manually release the park lock.

causym CAUTION: The tractor must never be operated (even for short test drives) when the park lock is manually released.

causym CAUTION: The tractor can roll away when the park lock is disengaged. Secure the tractor so that it cannot roll either forwards or backwards.

causym CAUTION: After towing, the manual park lock release cable must be reconnected.

1. Fold back the cup holder (B).

2. Remove mounting screws (B) and take out trim (C).

LX1025204

AG,OU12401,367 -19-01MAY01-1/7

3. Take plug (A) out of the threaded bore.

LX1026882

AG,OU12401,367 -19-01MAY01-2/7

4. Disconnect bowden cable (A) from the clamp.

LX1026881

AG,OU12401,367 -19-01MAY01-3/7

5. Unscrew threaded stud (A) and knurled nut (B).

LX1026883

AG,OU12401,367 -19-01MAY01-4/7

6. Slightly depress the clutch pedal.

7. Thread the bowden cable (A) through the eye (B) on the clutch pedal or adapter.

LX1026884
LX1026885

AG,OU12401,367 -19-01MAY01-5/7

8. Adjusting cable with knurled nut (A) until all slack is removed. Knurled section must be uppermost.

IMPORTANT: The cable must be tight in order to assure complete release of the park lock.

LX1026886

AG,OU12401,367 -19-01MAY01-6/7

9. Fully depress clutch pedal.

IMPORTANT: If the clutch pedal cannot be depressed to the stop and the threaded stud cannot be adjusted further, unscrew the knurled nut until the clutch pedal can be depressed against its stop.

10. Screw threaded stud (A) into opening (B) in order to secure the clutch in this position and maintain the park lock in the released position.

LX1026887

AG,OU12401,367 -19-01MAY01-7/7