|
The engine cooling system is filled to provide year-round protection against corrosion and cylinder liner pitting, and winter freeze protection to -37°C (-34°F).
John Deere COOL-GARD is preferred for service.
If John Deere COOL-GARD is not available, use a low silicate ethylene glycol or propylene glycol base coolant concentrate in a 50% mixture of concentrate with quality water.
The coolant concentrate shall be of a quality that provides cavitation protection to cast iron and aluminum parts in the cooling system. John Deere COOL-GARD meets this requirement.
Freeze protection
A 50% mixture of ethylene glycol engine coolant in water provides freeze protection to -37°C (-34°F).
|
A 50% mixture of propylene glycol engine coolant in water provides freeze protection to -33°C (-27°F).
If protection at lower temperatures is required, consult your John Deere dealer for recommendations.
Water quality
Water quality is important to the performance of the cooling system. Distilled, deionized, or demineralized water is recommended for mixing with ethylene glycol and propylene glycol base engine coolant concentrate.
IMPORTANT:
Do not use cooling system sealing additives or antifreeze that contains sealing additives.
IMPORTANT:
Do not mix ethylene glycol and propylene glycol base coolants.
|