Reduce Fuel Consumption
Service Correctly
Replace air cleaner element and fuel, engine oil and transmission/hydraulic filter elements at specified service intervals (see "Service" section).
Use only John Deere filters!
|
|
|
|
OU12401,0000571 -19-01JAN01-1/7
|
|
Use recommended oils and lubricants only (see "Fuel, Lubricants, Hydraulic Oil and Coolant" section).
|
|
|
|
OU12401,0000571 -19-01JAN01-2/7
|
|
Have the fuel system checked regularly by your John Deere dealer.
|
|
|
|
OU12401,0000571 -19-01JAN01-3/7
|
|
Have function of rockshaft control checked regularly by your John Deere dealer.
|
|
|
|
OU12401,0000571 -19-01JAN01-4/7
|
Drive with Correct Tire Pressures
Adapt tire pressures to type of work and ground conditions (consult your John Deere dealer or local tire agent).
|
|
|
|
OU12401,0000571 -19-01JAN01-5/7
|
Choose Correct Ballast
Choose ballast to obtain 10 to 15% wheel slip. Use no more ballast than necessary, reduce ballast for light work.
A-Too much ballast
B-Too little ballast
C-Correct ballast
|
|
|
|
OU12401,0000571 -19-01JAN01-6/7
|
Select Correct Gear
Always drive in the highest possible gear with reduced engine speed.
Choose a gear so that engine speed (A) with engine not under load drops 150 to 250 rpm when the tractor is operating and the engine is under load (B).
NOTE:
For light work, reduce engine speed below 2000 rpm. Select a gear so that engine speed drops 200 to 300 rpm when operating.
|
|
|
|
OU12401,0000571 -19-01JAN01-7/7
|
|
