|
PowrQuad Plus and AutoQuad II transmissions have the same number of gears and the same travel speeds as the corresponding PowrQuad transmission.
NOTE:
Depending on equipment and legal requirements, there may in certain circumstances be only 16 or 12 reverse gears.
The tractor may be equipped with an additional creeper transmission.
Gears should be selected so as to avoid permanent overloading of the engine. Ground travel speeds with engine running at rated speed are shown on the following pages.
Should you wish to determine ground speed travel at other engine speeds, then proceed as follows:
Desired engine speed
2100 rpm |
= Conversion factor
|
The conversion factor multiplied by the ground speed shown in the following table gives the ground travel speed at the desired engine speed.
|
Example:
Ground travel speed at 2100 rpm according to following table: 6.8 km/h; desired speed: 1400 rpm
6.8 km/h x 0.67 = 4.5 km/h
Should you wish to determine engine speed at a desired ground travel speed, proceed as follows:
Desired ground travel speed
Desired ground travel speed in table |
= Factor
|
The conversion factor multiplied by the rated speed gives you the desired engine rpm.
Example:
|