Rockshaft Remote Control

This switch allows the rockshaft to be operated at a distance from the operator's position. For safety reasons, the rockshaft rises and drops at a slower rate, and the height and depth values are ignored.

Push upper switch - Raise implement

Push lower switch - Lower implement

NOTE: Once the remote control has been activated, the rockshaft is prevented from moving accidentally. To make the rockshaft ready for operation again, either:

• move hitch control (A) to the position that corresponds to the position of the draft links,

• move hitch control (A) to one of the end positions, or

• actuate raise/lower switch (B).

OU12401,0000586 -19-06DEC00-1/1