Additional Indicator Lights

Light (A) flashes to indicate a fault in the cab suspension. Drive with extra care!

Light (B) comes on when rear PTO preselector switch is selected.

Light (C) comes on when the front PTO is engaged.

Light (D) comes on when the differential lock is engaged.

Light (E) comes on when front wheel drive is selected.

Light (F) comes on when the rear PTO is engaged.

Light (G) comes on when program 1 of HMS II is selected.

Light (H) comes on when program 2 of HMS II is selected.

Lights (J) indicate the selected PTO speed. Number and order of lights may vary according to tractor model.

Light (K) comes on when HMS II is selected.

Light (L) flashes to indicate a fault in the front-axle level control. Drive with extra care!

Light (M) comes on when cruise control is selected (Eco mode).

Light (N) comes on when cruise control is selected.

NOTE: If the PTO is already engaged when the engine is started, the PTO will not operate. The PTO must be disengaged and then re-engaged before it will start to turn.

OU12401,00005D3 -19-18APR01-1/1