Adjusting the Handbrake (6820, 6920 and 6920S Tractors)

On tractors equipped with air brakes, this adjustment must be performed by your John Deere dealer.

1. Before adjusting handbrake, set brake lever in the lowest notch of segment.

2. Separate yoke (A) from lever and screw it in until the holes are aligned with the hole in the lever.

NOTE: When the handbrake is correctly adjusted, it must be possible to pull the lever into the 4th notch using a force of 100 to 150 N (22 to 34 lb).

LX006366


A-Yoke

OU12401,000095F -19-01MAY01-1/1