Center Link Adjustment

Length of center link can be adjusted by means of adjusting handle (A). Lift up adjusting handle and turn it until the required length is achieved.

Length (B) must be between 530 mm (20.9 in.) and 725 mm (28.5 in.) on 6520 and 6620 tractors and between 587 mm (23.1 in.) and 782 mm (30.8 in.) on 6820, 6920 and 6920S tractors.

Do not deviate from the specified dimensions. After adjusting, push handle down again over center link. Insert attaching pin through implement mast and center link, and secure.

OU12401,0000970 -19-01MAY01-1/1