Wheel Slip (3)

Radar must be operational to provide true ground speed. If true ground speed is not available, "---" will be displayed.

Press % SLIP switch (A). The numerical display will show current wheel slip.

Press switch again to display the wheel slip alarm setting. An alarm symbol will be displayed.

NOTE: The illustration shows that the alarm is currently set at 12% (B). The alarm symbol (C) indicates that the alarm mode is set.

Press (D) to change alarm value.

Input alarm setting using touch pad, then press (D).

NOTE: Entering "0" as an alarm value will shut off alarm.

A-% slip switch
B-Numerical display
C-Wheel slip alarm
D-Set/save switch

OU12401,00009B9 -19-01JAN02-1/1