Changing Oil In Front-Wheel Drive Axle Housing

1. Remove drain screw (A) and drain oil into a suitable container.

2. Re-install drain plug and tighten to 150 N·m (110 lb-ft).

3. Remove oil level/filler plug (B). Fill with fresh oil. The oil level must be up to lip of filler neck. Re-install plug.

For capacities, see "Specifications".

NOTE: Location of screws varies depending on axle type.

LX006243
LX1019672
LX1029253
LX1029262

OU12401,0000B18 -19-01JUL02-1/1