Installing the Monitor

Attaching the performance monitor and controls

    There are several possible locations for attaching monitors and controls in the cab:

  • On the front right post.
  • On the center posts.
  • On the rear posts.

NOTE: Gap between holes at attaching points is 120 mm (4.72 in.); thread is M10.

Take off the relevant trim and turn it over. The positions where holes may be made are already marked.

LX1018216
LX1019361
LX1029298
LX1019362

OU12401,0000B24 -19-01JUL02-1/1