| Light |
Diagnostic trouble code |
Description |
| blue |
PLC 000629.12 |
Controller internal fault |
| blue |
PLC 000639.12 |
Controller internal fault |
| blue |
PLC 000639.13 |
29-BIT CAN BUS, high error rate |
| blue |
PLC 000639.19 |
29-BIT CAN BUS, very high error rate |
| yellow |
PLC 328010.31 |
Transmission output speed sender, grounded circuit. |
| yellow |
PLC 328012.31 |
Transmission output speed sender, open or shorted circuit |
| yellow |
PLC 328016.31 |
Parking lock pressure sender, shorted circuit |
| yellow |
PLC 328017.31 |
Park lock pressure sender, grounded or open circuit |
| yellow |
PLC 328020.31 |
Park lock solenoid valve, grounded or shorted circuit |
| yellow |
PLC 328021.31 |
Park lock solenoid valve, open circuit |
| blue |
PLC 328030.31 |
Transmission control unit is not transmitting any data |
| blue |
PLC 328040.31 |
System voltage too low |
| yellow |
PLC 328050.31 |
Park lock alarm, open or shorted circuit at supply line |
| yellow |
PLC 328051.31 |
Park lock alarm, shorted circuit |
| yellow |
PLC 328061.31 |
Signals received from reverse drive lever do not match the CAN BUS command from the TCU |
| yellow |
PLC 328101.31 |
Power supply to park lock pressure sender, grounded circuit |
| yellow |
PLC 328102.31 |
Power supply to park lock pressure sender, shorted circuit |
| yellow |
PLC 328106.31 |
Controller internal fault |
| yellow |
PLC 328240.31 |
Controller is connected to the wrong harness connector |