Adjusting Front Wheel Tread

Block up front end of tractor. Do not place jack under engine oil pan!

Remove tie rod clamp bolts (A) and axle bolts (B). Reposition axle ends to the desired front wheel tread. Reinsert axle bolts and tighten to 400 N·m (295 lb-ft).

Adjust tie rods to front wheel tread, reinsert clamp bolts and tighten to 50 N·m (35 lb-ft).

Check toe-in, and adjust if necessary.

LX,OSPU000224 -19-02MAR94-1/1