Installing Weights on Rack-and-Pinion Axle

Position wheel so that rim mark (A) is at the top. Insert the special attaching bolts (B) from inside of rim and drive them outward.

NOTE: When installing more than one weight drive three special bolts through square countersunk bores from the inside of first weight to be installed. Install second weight so that notch on this weight is separated from the notch on the first weight by 180°. Install third weight in same position as the first.

Install weight so that notch (C) on weight is aligned with mark (A). Tighten special bolts (B) securely.

NOTE: Bolts (D) shown in illustration are for the second weight.

A-Rim mark
B-Attaching bolts
C-Notch
D-Bolts for next weight

LX,OSPU000249 -19-01FEB92-1/1