Rockshaft Remote Control

This switch allows the rockshaft to be operated from outside the operator's cab. For safety reasons, the rockshaft rises and drops at a slower rate, and the height and depth values are ignored.

Pull switch out and push up - Raise implement

Pull switch out and push down - Lower implement

NOTE: Once the remote control has been activated, the rockshaft is prevented from moving accidentally. To make the rockshaft ready for operation again, either:

  • move hitch control lever (A) in the cab to the position that corresponds to the position of the draft links,

  • move hitch control lever to one of the end positions, or

  • actuate raise/lower switch (B).

LX1030665
LX1019372

OU12401,0000BEE -19-01JAN03-1/1