Limiting Front Wheel Steering Angle

With certain wheel treads, the front wheel steering angle must be limited to less than 50° (see table).

Adjust dimension (L) to one of the values shown in the table.

NOTE: Steering angle must be the same on both sides.

Tighten lock nut to 200 N·m (150 lb-ft).

LX1029233


J-Steering angle adjusting screw
K-Lock nut
L-Dimension


Position of rims and wheel disks (see "Adjusting Front Wheel Tread")
  16-position rims   1 4 5 8 9 12


Dim. L
 Dim. L
 Dim. L
 Dim. L
 Dim. L
 Dim. L
 Dim. L
  Tire size mm in. mm in. mm in. mm in. mm in. mm in. mm in.
Narrow-track axle 12.4-24         88 3.5 76 3.0 52 2.0 40 1.6    

12.4-28



88
 3.5
 76
 3.0
 52
 2.0
 40
 1.6

Adjustable wheels 12.4-24 - - 62 2.4 52 2.0 36 1.4 22 0.9 22 0.9 22 0.9
  13.6-24 - - 73 2.9 64 2.5 50 2.0 36 1.4 22 0.9 22 0.9
  14.9-24 - - - - 71 2.8 62 2.4 48 1.9 38 1.5 24 0.9
  16.9-24 - - - - 78 3.0 71 2.8 55 2.2 45 1.8 34 1.3
  11.2-28 - - 64 2.5 48 1.9 34 1.3 22 0.9 22 0.9 22 0.9
  12.4-28 - - 71 2.8 64 2.5 50 2.0 34 1.3 24 0.9 22 0.9
  13.6-28 - - - - 65 2.6 42 1.7 30 1.2 30 1.2 30 1.2

13.6-38
 -
 -
 -
 -
 61
 2.4
 50
 2.0
 36
 1.4
 30
 1.2
 30
 1.2

 

OU12401,001043A -19-01MAR03-1/1