Shifting SYNCROPLUS™ / Power Reverser

The transmission is controlled via range shift lever (A) and gear shift lever (B). An additional control on the Power Reverser is reverse drive lever (C).

IMPORTANT: Engage parking lock only when the tractor is stationary.

NOTE: After the engine has been started, wait for 5 seconds before moving the gear lever (B) or reverse drive lever (C) out of neutral position.

Optimum Gear-Shifting for Driving under Load (Transport):

1. Select a range suitable for driving away under load.
2. Engage the first gear.
3. Drive away and change up through the ranges until the top range is reached.
4. Change up through the gears.

SYNCROPLUS is a trademark of Deere & Company.

AG,OU12401,194 -19-07APR00-1/1