Shifting the AutoQuad II Transmission

This transmission is shifted in the same way as the PowrQuad Plus (see above). However, it has two further functions: "Cruise Control" and "Shifting with the Foot Throttle".

These functions can be switched on and off at switch (A). The desired engine speed is selected using potentiometer (B).

Regardless of engine torque, engine speed is held constant at a preset value.

The gears in each range are shifted up or down in relation to the position of the foot throttle as soon as engine speed reaches a maximum or minimum value.

Power mode: The gears shift up when the foot throttle is pressed more than 85% of its travel and the engine is at rated speed minus 20 rpm.
The gears shift down when the foot throttle is pressed more than 55% of its travel and engine speed is between 1100 and 1700 rpm.
The gears shift down when the foot throttle is pressed less than 55% of its travel and engine speed is less than 1100 rpm.

Eco mode: The gears shift up when the foot throttle is pressed more than 85% of its travel and engine speed is 1900 rpm.
The gears shift down when the foot throttle is pressed more than 55% of its travel and engine speed is between 1100 and 1410 rpm.
The gears shift down when the foot throttle is pressed less than 55% of its travel and engine speed is less than 1100 rpm.

NOTE: "Eco mode" is suitable for light work in the field and for driving on roads when the load being pulled is not heavy.

AG,OU12401,201 -19-07APR00-1/1