Changing Oil In Front-Wheel Drive Final Drives

CAUTION: On axles with brake: If final drives are hot, oil is under pressure. Remove drain screws slowly.

1. Turn wheel until drain screw (A) is at the bottom. Remove drain screw and drain oil into a suitable container.

2. Turn the wheel through 90° so that the "Ölstand" mark is at the bottom (see "Service - Every 250 Hours"), and add oil at the hole for the screw plug. Oil should be level with plug bore.

3. Reinstall drain screw and tighten to 150 N·m (110 lb-ft).

For capacities, see "Specifications".

AG,OU12401,254 -19-08APR00-1/1