Adjusting Front Wheel Tread

Block up front end of tractor. Do not place jack under engine oil pan!

Remove tie-rod clamp bolts (A) and axle bolts (B). Reposition axle ends to the desired front wheel tread. Re-insert axle bolts and tighten to 400 N·m (295 lb-ft).

Adjust tie-rods to front wheel tread, re-insert clamp bolts and tighten to 50 N·m (35 lb-ft).

Check toe-in, and adjust if necessary.

AG,OU12401,288 -19-10APR00-1/1