Adjusting Front Wheel Tread with Adjustable Rims (8-position)
|
|
Front wheel tread can be adjusted by replacing or reversing the wheel rims. IMPORTANT: Nuts must be installed on outside of wheel. In addition, the complete wheel can be reversed and installed on the opposite side of the tractor. Change |
the wheels from one side to the other, and make sure the arrows on the side walls of the tires are still pointing forward.
NOTE: Wheel tread on tractors equipped with a front loader must not exceed 1.80 m (71 in.). |
| Position of Rims and Wheel Disks |
|||||||
|---|---|---|---|---|---|---|---|
| Tires |
B |
C |
D |
E |
F |
G |
|
| Narrow-track axle |
1245 mm (49.0 in.) |
1345 mm (53.0 in.) |
1445 mm (56.9 in.) |
1545 mm (60.8 in.) |
|||
| 12.4-24 | x | x | x | x | |||
| 12.4-28 |
x |
x |
x |
x |
|||
| Standard axle |
1516 mm (59.7 in.) |
1616 mm (63.6 in.) |
1720 mm (67.7 in.) |
1820 mm (71.7 in.) |
1916 mm (75.4 in.) |
2016 mm (79.4 in.) |
|
| 14.9-24 | - | x | x | x | x | x | |
| 16.9-24 | - | x | x | x | x | x | |
| 380/70-24 | - | x | x | x | x | x | |
| 420/70-24 | - | x | x | x | x | x | |
| 480/65-24 | - | - | x | x | x | x | |
| 480/70-24 | - | - | x | x | x | x | |
| 540/65-24 | - | - | - | x | x | x | |
| 13.6-28 | - | x | x | x | x | x | |
| 14.9-28 | - | - | x | x | x | x | |
| 380/70-28 | - | x | x | x | x | x | |
| 420/70-28 | - | - | x | x | x | x | |
| 480/65-28 | - | - | x | x | x | x | |
| all other | x | x | x | x | x | x | |
|
NOTE: Your John Deere dealer can supply you with 60 mm (2.36 in.) spacers. Spacers allow the tread widths listed here to be extended by 120 |
mm (4.72 in.). With certain tire sizes and spacers, position A (see drawing) may be achieved. |
AG,OU12401,294 -19-01DEC00-1/1 |