Manual Park Lock Release (Tractors with AutoPowr)

causym CAUTION: Perform the manual park lock release procedure only when the tractor needs to be towed and the park lock cannot be released normally.

causym CAUTION: The reverse drive lever must be in the corner Park position "P" in order to manually release the park lock.

causym CAUTION: The tractor must never be operated (even for short test drives) when the park lock is manually released.

causym CAUTION: The tractor can roll away when the park lock is disengaged. Secure the tractor so that it cannot roll either forwards or backwards.

causym CAUTION: After towing, the manual park lock release cable must be reconnected.

1. Fold back the cup holder (B).

2. Remove mounting screws (B) and take out trim (C).

LX1025204

AG,OU12401,367 -19-01SEP00-1/6

3. Loosen cable (A) from clamp (B).

LX1025205

AG,OU12401,367 -19-01SEP00-2/6

4. Unscrew threaded stud (A) and knurled nut (B).

LX1025206

AG,OU12401,367 -19-01SEP00-3/6

5. Slightly depress the clutch pedal and thread the cable through eye (A) on the clutch pedal.

LX1025207

AG,OU12401,367 -19-01SEP00-4/6

6. Adjusting cable with knurled nut (A) until all slack is removed. Knurled section must be uppermost.

IMPORTANT: The cable must be tight in order to assure complete release of the park lock.

LX1025208

AG,OU12401,367 -19-01SEP00-5/6

7. Fully depress clutch pedal.

IMPORTANT: If the clutch pedal cannot be depressed to the stop and the threaded stud cannot be adjusted further, unscrew the knurled nut until the clutch pedal can be depressed against its stop.

8. Screw threaded stud (A) into opening (B) in order to secure the clutch in this position and maintain the park lock in the released position.

LX1025209

AG,OU12401,367 -19-01SEP00-6/6