Hatch Positions

The roof hatch can be raised at either the front or the rear. To change the end at which the hatch opens, pull out pins (D) and pull the retainers from cylinders (C). Disengage cylinders (C) and turn the hatch through 180°. Engage cylinders and press in the retainer. Insert pins.

The hatch can be opened to two different angles.

1. Cylinders secured at position (A) = narrower angle
2. Cylinders secured at position (B) = wider angle

To change the angle at which the hatch is opened, unscrew bearing pin from cylinder (C) and screw it in at the desired position (A) or (B).

NOTE: In certain countries, legal requirements stipulate that the hatch opens to one angle only.

To disengage cylinders (C), use a pointed object to pull out the pin, and then disengage cylinders (C).

To engage, place cylinders (C) on the bearing pin and push in the pin.

LX,OKAB005606 -19-01MAR94-1/1