|
CODES 42, 44
|
Stepper motor defective
|
See your John Deere dealer.
|
|
CODE 49
|
Raise/lower switch defective
|
Use depth control. See your John Deere dealer.
|
|
CODE 50
|
Rockshaft requires recalibration
|
See your John Deere dealer.
|
|
CODES 51, 52
|
Draft sensor defective
|
See your John Deere dealer.
|
|
CODE 53
|
Load/depth control defective. Depth control still possible
|
See your John Deere dealer.
|
|
CODE 54
|
Depth control defective
|
Use raise/lower switch! See your John Deere dealer.
|
|
CODE 55
|
Defective position sensor. Only emergency raise/lower can function
|
See your John Deere dealer.
|
|
CODE 56
|
Lift limit defective. Max. height is reduced
|
See your John Deere dealer.
|
|
CODE 57
|
Rate-of-drop defective. Rate set to "medium"
|
See your John Deere dealer.
|
|
CODE 58
|
Remote control switch defective
|
See your John Deere dealer.
|