Super Comfort Seat

To adjust the seat upward, raise it until it clicks into place (maximum of 3 detent positions). To adjust downward, raise the seat to the stop position and then lower it.

IMPORTANT: Before turning the seat, always switch off the engine. This prevents the tractor or implements from moving if any of the controls are accidentally moved.

If the seat is equipped with a swivel (optional equipment), this is operated by means of lever (G) as follows:

Lift the lever up. The seat turns 200° to the left and 20° to the right. The seat locks at 10° intervals.

As a further option, the seat may be equipped with the same type of swivel described at "Air Comfort Seat".

To lower the armrest through 30°, press the armrest tilt adjuster (E) into the armrest.

A-Crank for adjusting seat to suit operator's weight
B-Lever for seat tilt adjustment¹
C-Lever for adjusting the cushion position¹
D-Horizontal adjustment
E-Armrest tilt adjustment
F-Backrest tilt adjustment
G-Lever for swivel movement¹
H-Lever for fore/aft spring¹
J-Lumbar support adjustment

LX,OMKAB011272 -19-01SEP99-1/1