Blower and Air Louvers

The four blower speeds are controlled by a switch (A). The general direction of the airflow can be altered by means of switch (B).

De-icing or De-misting the windshield

Set the heater to maximum heat output. Set switch (B) to symbol (D) and turn switch (A) (blower) to position 4.

If the airflow is to be directed at the operator , set switch (B) to symbol (E). Turn on the blower at switch (A). The direction and force of the airflow can be further adjusted at louvers (C).

If the airflow is to be directed evenly around the cab , set switch (B) to symbol (F). Turn on the blower at switch (A).

If the airflow is to be directed into the footwell , set switch (B) to symbol (G). Turn on the blower at switch (A).

Direction of airflow

Positions of switch (B):

  • Symbol (D) = air flows to windshield
  • Symbol (E) = air flows to operator
  • Symbol (F) = air flows to windows, operator and footwell
  • Symbol (G) = air flows to footwell
LX1017697
LX1017698
LX007940

LX,OMKAB011276 -19-01SEP97-1/1