Air Comfort Seat

1. Adjust weight

After starting the engine, release lever (E) briefly to bring the seat to its central position.

2. Adjust height

To adjust the height, pull lever (E) upward or push it down.

3. Adjust spring setting

The seat's spring setting can be varied from soft to hard by means of lever (F).

• Lever (F) forward - soft
• Lever (F) backward - hard

4. Adjust fore/aft spring

• Lever (D) forward - Fore/aft suspension
• Lever (D) backward - No fore/aft suspension

5. Adjust lateral spring

• Lever (H) forward - lateral suspension
• Lever (H) backward - no lateral suspension

IMPORTANT: Before turning the seat, always switch off the engine. This prevents the tractor or implements from moving if any of the controls are accidentally moved.

The seat swivel is operated by means of lever (G) as follows:

Lift the lever up. The seat turns 15° to the left and right. The seat locks at 7.5° intervals.

To lower the armrest through 30°, press the armrest tilt adjuster (L) into the armrest. Knob (K) allows the height of the armrests to be adjusted to any of 5 positions.

A-Lever for adjusting the cushion position¹
B-Lever for seat tilt adjustment¹
C-Horizontal adjustment
D-Lever for fore/aft spring
E-Height adjustment
F-Spring setting adjustment
G-Lever for swivel movement
H-Lever for lateral suspension
J-Backrest tilt
K-Armrest height adjustment
L-Armrest tilt adjustment
M-Pneumatic lumbar support adjustment
N-Seat heater switch¹

LX,OMKAB020556 -19-01MAR00-1/1