Rockshaft Remote Control

This switch allows the rockshaft to be operated at a distance from the operator's position. For safety reasons, the rockshaft rises and drops at a slower rate, and the height and depth values are ignored.

Push upper switch - Raise implement

Push lower switch - Lower implement

NOTE: Once the remote control has been activated, the rockshaft is prevented from moving accidentally. To make the rockshaft ready for operation again, either:

move hitch control lever (A) to the position that corresponds to the position of the draft links,

move hitch control lever (A) to one of the end positions, or

actuate raise/lower switch (B).

LX,OMREG011303 -19-01MAY98-1/1