Control Lever for Selective Control Valves

The control lever has four settings.

The remote cylinder extends when the lever is moved to the "Raise" position.
The remote cylinder is held in place when the lever is in "Neutral".
The remote cylinder retracts when the lever is moved to the "Lower" position.
When the lever is in the "Float" position (i.e. piston moves freely inside remote cylinder), the mounted implement follows the ground contours.

NOTE: If additional external valves are used, move the control lever to neutral when shutting off each hydraulic function.

causym CAUTION: With 100 Series selective control valves, the "raise" and "lower" functions have a mechanical detent. When starting the engine, make sure that the control lever is in "neutral".

 

LX1017722
L32200


A-Lower
B-Raise
C-Neutral position
D-Float position

LX,OMZUS013321 -19-01MAR00-1/2

Locks (A) allow the control levers to be secured in neutral.

NOTE: Apply locks (A) when driving on roads and whenever the control levers are in neutral because they are not required.

LX1017723

LX,OMZUS013321 -19-01MAR00-2/2