Multi-Function Lever

The multi-function lever (A) allows two selective control valves to be operated at the same time.

Locking collar (B) can be used to secure the lever in one of two positions. If the lever is not required, move locking ring (C) to position (E) and slacken off locking collar (B). Swing the lever to the right and tighten locking collar (B) again.

Additional functions can be obtained at switches (D).

Locking ring (C) can be used to lock out various lever movements.

A-Multi-function lever
B-Locking collar
C-Locking ring
D-Switches
E-Lever locked
F-Lever not locked
G-Lever locked to left and right
H-Lever locked to front and rear

LX,OZUS007257 -19-01MAR00-1/1