Limiting Front Wheel Steering Angle

With certain wheel treads, the front wheel steering angle must be limited to less than 50° (see table).

Adjust dimension (L) to one of the values shown in the table.

NOTE: Steering angle must be the same on both sides.

Tighten lock nut to 200 N·m (150 lb-ft).

LX006486


J-Steering angle adjusting screw
K-Lock nut
L-Dimension

    Positions of Rims and Wheel Disks (6405 tractors, see previous page)


A
Dim. L		 B
Dim. L		 C
Dim. L		 D
Dim. L		 E
Dim. L		 F
Dim. L		 G
Dim. L
  Tires mm in. mm in. mm in. mm in. mm in. mm in. mm in.
Standard tread widths

With 60 mm (2.36 in.) spacers		 12.4-24
13.6-38

12.4-24
13.6-38
 -
-

65
-
 -
-

2.6
-
 65
-

42
61
 2.6
-

1.7
2.4
 42
61

30
50
 1.7
2.4

1.2
2.5
 30
50

30
36
 1.2
2.0

1.2
1.4
 30
36

30
30
 1.2
1.4

1.2
1.2
 30
30

30
30
 1.2
1.2

1.2
1.2
 30
30

30
30
 1.2
1.2

1.2
1.2

 

    Positions of Rims and Wheel Disks (6605 tractors, see previous page)


A
Dim. L		 B
Dim. L		 C
Dim. L		 D
Dim. L		 E
Dim. L		 F
Dim. L		 G
Dim. L
  Tires mm in. mm in. mm in. mm in. mm in. mm in. mm in.
Standard tread widths

With 60 mm (2.36 in.) spacers		 12.4-28
12.4-42

12.4-28
12.4-42
 -
-

65
-
 -
-

2.6
-
 65
-

42
61
 2.6
-

1.7
2.4
 42
61

30
50
 1.7
2.4

1.2
2.5
 30
50

30
36
 1.2
2.0

1.2
1.4
 30
36

30
30
 1.2
1.4

1.2
1.2
 30
30

30
30
 1.2
1.2

1.2
1.2
 30
30

30
30
 1.2
1.2

1.2
1.2

 

AG,OU12401,10103 -19-03AUG00-1/1