1-These flashing indicator lights start flashing when turn-signal or hazard warning lights are switched on.

2-This warning light glows when transmission/hydraulic oil temperature is too high.

3-If engine oil pressure warning light glows with engine running, shut off engine and check the level of engine oil.

4-If this light glows, the transmission/hydraulic oil pressure is too low. See your John Deere dealer immediately.

5-This light glows when front wheel drive is selected.

6-This light glows when the work lights are switched on.

7-The high beam indicator light will glow whenever the headlights are switched on at high beam.

8-If alternator indicator light glows with engine running, this indicates a defect at alternator. Check alternator

9-If air cleaner indicator light glows with engine running, the air cleaner element must be cleaned or replaced.

10-This light glows when the transmission oil filter is clogged or the oil temperature is too low.

11-This light glows when the rear PTO is engaged.

12-This light glows when the differential lock is engaged.

Bulb test: As the engine is started, all the lights should glow for approx. 1 second. If this is not the case, a defective bulb or blown fuse may be the cause. Check and replace parts as necessary. The indicator lights should go out as soon as the engine is running.

AG,OU12401,5 -19-01OCT00-1/1